#!/bin/sh /etc/rc.common

START=50
STOP=10

boot() {
	if [[ -e "/lib/firmware/gd3x/gd3x.bin" ]]; then
		/etc/init.d/svcontrol stop
		/etc/init.d/event-handler stop
		echo 1 > /sys/bus/i2c/devices/0-0011/fw_upgrade
		echo 0 > /sys/bus/i2c/devices/0-0011/heat_end_temp
		count=0
		while [[ "$count" -le "5" ]]; do
			sleep 2
			stm32flash -a 0x22 /dev/i2c-0
			if [[ "$?" -eq 0 ]]; then
				break
			fi
		done
		if [[ "$count" -eq "5" ]]; then
			/etc/init.d/svcontrol start
			exit 1
		fi
		sleep 1
		stm32flash -a 0x22 -o -S 0x8024000 /dev/i2c-0
		sleep 1
		stm32flash -a 0x22 -w /lib/firmware/gd3x/gd3x.bin -g 0x8024000 -S 0x8024000 /dev/i2c-0
		if [[ "$?" -eq 0 ]]; then
			sleep 60
			rm /lib/firmware/gd3x/gd3x.bin
		fi
		echo 5 > /sys/bus/i2c/devices/0-0011/heat_end_temp
		sync
		/etc/init.d/svcontrol start
		/etc/init.d/event-handler start
	fi
}
